Exiway Smartexit

Self-contained Exit Sign with Led Light source available for addressable Dicube system. Indication panel in compliance with EN1838 regulations with 24 and 32 meters visibility distance. Maintained and non-maintained mode available, Full automatic or sequential addressing method during the set-up of the system, monitoring and diagnostic embedded in the luminaire. Protection Degree IP42. Laser receiver for manual test launch and professional sequential addressing. Possible solution for installation: wall-mounted, vertical flag mounted with dedicated pictograms, surface ceiling mounted.

• Maintained and Non-maintained Exit sign LED luminaire with EN1838 ISO 7010 pictograms (included). Equipped with a dedicated electronic circuit able to perform periodical tests, to recognize the faults after a test. A Multicolored led status shows recharging status and indicates local faults and also battery disconnected. The addressing can be done in 2 ways; Full-Auto, automatic addressing for each luminaires connected to the Control Unit. Sequential , the user can choose the address for each luminaire from supervisioning software (PC Suite) or APP and than confirm it pointing the desired luminaire with the laser pointer. Luminaires with Laser received embedded for the sequential addressing and for launching manual test. Integrated VLDP (Visual Lighting Data Pulling) device for downloading luminaires information through dedicated device compatible with VLDP APP(Android). Remote functioning control available through dedicated control Unit Smart Control connected with standard polarized cables (not included). Predisposed for the emergency function inhibition in compliance with CEI EN 60598-2-22 regulation through control unit Smart Control (not included). Compatible with supervisioning protocol DALI Emergency Lighting.Manufactured with autoestinguishing thermoplastic material 94V-2 (UL 94) flame resistant, in compliance with CEI 34-21, CEI EN 60598-2-22, EN 62034 regulations and ENEC certified.Protection degree: IP40 IK04. Insulation class II. Simplified wall and ceiling installation thanks to the quick fix which grant mechanical and electric connection. Pre-drilled slotted fixing holes helps to align the luminaire. Flush mounted or false ceiling installation available with dedicated accessories (not included). Up to 20mm entry cables for tubes and cables through dedicated accessory (included). Screwless connector available for cables diameter range from 1mm² to 2,5mm² both rigid and flexible. High temperature Hermetic rechargeable batteries LiFePO4 3,2V 1,5Ah with fast connectors for an easy maintenance. Minimum autonomy 1.5 hours. Complete recharge within 12 hours. Mains supply 230V, 50/60Hz. Inhibit function in compliance with CEI EN 60598-2-22 regulation. Visibility distance in compliance with EN1838 and CEI EN 60598-2-22: 24 and 32 meters. Lighting source:18 high flux Led 0,1W in compliance with EN 62471, emergency lighting luminaire classified as group Zero (CEI EN 62471).